How To Make A Braided Round Leather Cord Necklace With Magnetic Clasps?

The best thing of this necklace is that it’s made by using a single piece of Leather cord, rather than 3 separate ones to create the braid, and by doubling the cord up we get a fancy looking interweave!


Supplies:

Round Leather Cord, 2 metres (approx 2.2 yards) of 4mm

Masking or painters tape

Measuring Tape

Scissors

 Round Magnetic Clasp 4mm

Firstly, we have to cut a 2 metre length of cord and double it over. Then attach doubled up cord to our working space with some tape. We will have to leave about 25cm at the top (above the tape) leaving the remaining cord at the bottom to create our braid.

Secondly, using the long end, make a loop by bringing it back up on the right, under itself just below the tape. After that we will bring the end back over to the right and down through the loop finishing with the long end on the right. With this we will have three cords to braid with. Start by bringing the cord on the left into the middle.


Thirdly, we are going to bring the cord on the right into the middle. Make sure to keep the doubled up cords flat next to each other.

Fourthly, we will pull the long tail through the loop created by the other two cords and to avoid the cords getting tangled we have to put a finger on the braiding stops, which is going to keep cord from pulling out of shape.

Fifthly, continue braiding, until we reach the bottom by bringing the left cord into the middle, then the right.  To complete the braid, we are going to bring the long end over into the middle, which will look like a loop at the bottom. It is advisable to follow this last step with some room to spare, rather than trying to make it really tight. Then by pulling the sections apart slightly, we are going to put in order the braiding in place.

Sixthly, we will gently curve out the braiding, making sure none of the cords are warped. The braided section will be approx 13cm long and now we have 20-25cm of cord left on each side to make up the rest of the necklace. If you want then length of the necklace can be shorten, as per your choice.

Lastly, we are going to add the magnetic clasp: Fill the half of the Magnetic clasps with glue and start to slide the cord inside the slot. Push down the cord and make sure it is inserted properly. Wipe off the extra glue on your clasps and cords with the wiper.


Follow this step on the both side of the necklace cord end and give your neck piece an easy accessible closure with the magnetic clasps.

As the biggest manufacturer of leather, steel clasps, and jewelry components, we can offer you, many types of magnetic clasps in all sizes, colors, and styles. Whether the magnetic clasps has to be in stainless steel, gold, or rosé gold, we can customize everything based on your personal needs and wishes. The same applies to our collection of leather cords. From flat leather cords to round braided cords, we offer a large collection in many different colors and sizes.

For larger production, we can also finish Leather cord bracelets completely for you as well. We also help you brand the products as needed. 

For more information, don’t hesitate to contact us and to follow us on our social media. Sun Enterprises will be glad to help you.

đŸ‘‰ Discover Sun Enterprises’ wide range of flat and round magnetic clasps for leather bracelets in many sizes and finishes.

Company name: Sun Enterprises B.V.

Head office: Antennestraat 62, 1322 AS Almere, The Netherlands

Phone numbers: +31 62 7061933 / +31 64 6335825

Email: info@sunenterprises.eu

Website: www.sunenterprises.eu

Opening hours: Monday – Friday 9:30 – 18:00

Comments

Popular posts from this blog

What Is the Difference Between Chiffon and Habotai Silk?

Locking & Slide Magnetic Clasps for Heavy Leather Bracelets

A Complete Guide to Leather Types and How to Care for Them